DIY Personalized Felt Pennant Flag for under $5!

Stopping in today with one last quick and easy DIY project before the final budget boy's room makeover reveal tomorrow!

So far I have completed a handful of significant upgrades to the space (roman shades, rustic wood headboard, shelf and desk, teepee) but I also wanted to add a small, personalized touch and had the well suited blank wall in mind…

It is the first thing you see when you walk into the room and I thought something cute and unfussy would be nice behind the teepee. Since we are going with a woodland/camping/outdoorsy theme, I could not get these vintage style pennant flags out of my head…

As this is a budget makeover, buying one was not an option and I knew it could be a particularly easy and cheap DIY.

I stopped by Joann's and found sheets of felt that were well suited. They carry mostly 9×12″s but there were a few 12×18″s that were stiffer, well suited for the flag size and easier for cutting letters. So I bought one in dark green and one in white at $2.5/ea, and a 9×12″ in dark brown for the edge for 50 cents. After a 30% off coupon, my total came in at under $4!

The only other tools needed were scissors (and/or an Xacto knife) and hot glue.

Step 1: Cut your 12×18″ sheet into a triangle for your flag.

Step 2: Cut strips for your border and ties.

Step 3: Measure your flag and decide on your lettering.

I set up a quick template in Illustrator and chose a bold font for easy cutting.

Once I had my letters to scale, I arranged them on an 8.5×11″ sheet and printed them on adhesive backed paper:

Step 4: Cut out your letters (I found an Xacto knife to be much easier).

Step 5: Peel the adhesive backing off and position each letter on your felt (or pin them down, trace the letters, or use temporary adhesive).

Step 6: Cut the letters out of your felt.

Now you have all of your pieces ready to assemble.

Step 7: Hot glue everything together.

Step 8: Step back and admire your creation:

For less than five bucks, you genuinely cannot go wrong here. To mount to the wall, I used a couple staples (with my hand stapler) hidden underneath the felt.

Here is a sneak peek from tomorrow's reveal…

I cannot wait to share more! Editing those photos now. Stay tuned for the After photos along with a complete budget breakdown, grand total and source list!