DIY Outdoor Tiled Dining Table

If you are looking for a unique alternative to standard wood or metal outdoor dining tables, a tiled table may be the well suited solution. This method is a unfussy and beginner-friendly technique requiring no messy thinset or grout. The end result is a durable, low maintenance and custom outdoor table using your favorite tile. This is how we did it!

Tiled table inspiration

When searching for a dining table for the Spanish Sanctuary backyard, I was faced with the same nearly impossible task as always—finding a large enough table to seat 10-12 guests, that holds up to the Florida elements, looks great and does not cost a fortune. I have never found a table that checks all the boxes, so I began to think of creative solutions.

One day, I came across this photo and had my a-ha moment—a custom tiled table:

Last spring we DIY'd a tiled coffee table, so the idea was not brand new, but I wanted this one to feel different. I envisioned a classic Mediterranean al-fresco dining experience under a pergola, with traditional metal lattice chairs and a patterned tile table:

It felt well suited for our “European boutique resort” style backyard, and likely the most durable material to hold up to the harsh Florida elements. The search was on to find the well suited table.

Where to find a table

I briefly considered building our own table and tiling on top of it, but honestly that would require more time and energy than it is worth at this stage of the renovation.

If you are not up for a DIY, Etsy has some genuinely nice customized Moroccan zellige tables. The other option is to re-tile an existing tiled table, or you even can start with a glass top table. There are a handful of new options online, but your best bet is to check local resale—Facebook Marketplace has the largest selection. My only problem? Nothing was big enough for our space. I was about to settle on pushing two tables together until…

I found it. Months of searching Facebook Marketplace had finally paid off. A 10' beauty with custom ironwork and so much potential. I have never messaged a seller so fast and practically begged her to let me pick it up that night. I hired movers to help load her safely, and $80 later, she was sitting in her final resting place.

Prepping the table for tile

The first step is to ensure the new tile has a sound, solid surface to rest on. In our case, the tile and grout were cracked and dried out, the plywood base was rotted, and metal frame rusted after years outside.

We enlisted our tile guy's help to knock this project out over a couple days. The first step was demo: removing everything down to the bare metal frame.

The rust was removed from the metal with a drill, grinder and wire brush attachments.

New 3/4' plywood sheets were cut down to fit, and coated on both sides with a waterproofing stain + sealer.

The metal was also coated with a rust-blocking protective enamel.

How to re-tile the table

With the table repaired, it was time to lay the tile. I spent hours searching for an outdoor-safe option that fit the Mediterranean feel, worked with the scale of the table, and did not cost a small fortune. I eventually landed on this 8×8' porcelain tile. The quatrefoil pattern has that timeless Spanish feel It helps to keep and the emerald tone pulls from the surrounding landscaping and furniture.

I first mocked it up in Illustrator to make sure I was happy with the overall look and layout:

Then we started the dry fit and came up with a plan.

Instead of traditional thinset and grout, we opted to use a waterproof sealant to help reduce the weight. The tabletop had warped from the excessive weight over time, and this lighter and more flexible method will also help prevent future cracking.

After each tile was set in place, adhesive was applied along each edge to create a waterproof seal between the tiles. I am a fan of the cleaner, seamless look of no grout lines.

The pattern was centered on the table, and our installer trimmed the edges of the border tile for a well suited snug fit.

Another reason It helps to keep this tile is how easy it was to work with. The size and repeating pattern made the process unfussy enough to complete in just one afternoon.

The Result

This is how it looks with our new chairs!

I chose these inexpensive metal lattice chairs that mirror the style of our chaise lounges and bistro set. They have that classic European design, and they are cast aluminum so they will not rust like traditional cast iron.

Can you imagine this pergola in a few years covered in a lush canopy of yellow honeysuckle? It is going to be magical.

Time will tell how well this table holds up after a few Florida summers, but I am hopeful it will fare better than the previous wood and aluminum tables we have had to replace in the past.

Here is the view from the pool area. I set up the chaise lounges, cushions and umbrellas a few weeks ago, and added a bistro set in the opposite corner last week. You can see videos of the whole setup on my Instagram.

The final phase of the backyard is building an outdoor kitchen under the covered patio. Still working on plans for that, but first we are focusing on the main kitchen. I have been posting updates over in my Instagram stories if you want to see the latest! Much more to come,

Like this post? Here is more backyard inspo:

1. All about our Spool Pool
2. The Spanish Sanctuary Backyard Plans
3. DIY Jasmine Wire Trellis Wall