DIY Vent Hood + new floors, counters and sink: Cottage House Flip Episode 9

Whew, what a week it is been! I hope you all got to enjoy a nice, long relaxing break (some of you still are, cheers!). We were blessed with a white Christmas at the flip:

I had hoped to accomplish an ambitious list of projects over the weekend, but realized pretty quickly that it was too much to try to squeeze in around the holidays when there is family in town. You can watch it all go down in this week's Cottage House Flip Episode 9:

The most important task was to install the vent for the stove and build a hood cover for it. I would also hoped to mount two floating shelves and stain & seal the counters. Spoiler alert: We only completed 90% of task #1.

But before we talk DIY, let us look at all of the other updates. Since my last post, we have one genuinely big exciting change: new floors!

Well, mostly. Those are also 90% installed, but should be done by the time I come back. I decided on the Pergo Max Premiere in Scottsdale Oak (Update, this color has been discontinued, but you can finda similar shade here.

They are 7.5″ wide plank laminate and have a nice matte finish with an embossed texture that makes them look more like authentic rustic wood.

Originally I was set on engineered wood, but while at Lowe's these caught my eye and I actually preferred the look to the wood (you can see the wood sample on the left and Pergo on the right):

With a lifetime warranty, high durability and scratch resistance, 5 star ratings online, and oh yeah—less than half the cost of the engineered wood—it was a pretty easy choice. And I think I chose well.

I was on the fence about painting some of the wood trim upstairs, but this has made it abundantly clear that the stair landing wall and most of the wall paneling in the bedrooms will be need to painted:

In the same soft gray as the bedroom closet doors, Valspar's Woodlawn Colonial Gray (excuse the sawdusty mess, but you get the idea):

Who wants to come help paint? 🙂

Let us move on to my favorite space… the upstairs bathroom!

The wall boards have been patched, the tub is back in place, and the faucet and sink are almost functional…

It is so close, I can feel it!

I would be happy to just talk about and stare at this room all day, but we have got a ton going on in the kitchen, so let us head downstairs.

It was a mad house at the flip on Saturday morning, with 3 guys laying floors, 2 more installing the counter and sink, another just outside and my dad, Lucas and I trying to figure out the vent hood situation—all fighting for space in a small kitchen. But we made it work.

…and look at the new sink and counters!

I mentioned after my Kitchen Plans post that I would switched to Lowe's baltic butcher blockinstead of Ikea (I was not able to make it to Ikea and it did not make sense to pay for delivery, plus the Lowe's butcher block is solid, thicker, and comes unfinished):

My contractor did a great job mitering the pieces and making it look seamless, and now all it needs is some stain and sealer. I plan to stain it in light/medium neutral shade, similar to the floors.

And this sink…

Is not she pretty? I also switched my original Ikea plan with this massive 36″ Vigo model from Lowe's.

It helps to keep the slotted detailing on the front and think it gives it a nice unique touch. So pleased with how both of these turned out!

Okay… now for the DIY project. Let me preface this by saying I have built everything from tables to cabinets to doors & more, and nothing comes close to the level of complexity that was this vent hood. I made my calculations and drew up fancy computer generated plans… and ended up tossing them as soon as I realized what I would gotten myself into.

With that said, this tutorial will not be thorough, because none of us can even explain what we did—including my dad who is a former carpenter.

But let us back up for a second. Here is the empty wall I was working with, above the gap where the stove will go:

I had my electrician install wall sconces to flank the range hood:

And I was picturing something along these lines:

Seems pretty straight forward, right? Just build a frame, attach it to the vent, and nail up some boards. A fun little weekend project, spending some quality time with my boys.

On Friday we went to the lumber yard and grabbed about 30 feet of these 1×8″ reclaimed wood boards, which just so happened to match the new floors quite nicely:

But those would come into play later. First we had to build a frame to hold this shiny new vent hood to the wall:

It is a Broan PME300 from Lowe's, and I also picked up a 6″ duct kit to vent to the outside (which is always recommended).

After measuring and drawing out my dimensions on the wall, we built a frame out of 2×4's which fit snugly around the outside:

Then we secured a couple boards to the back wall to push the vent out a bit, since it has to be positioned close to the center of the stove for best results.

At the top, we nailed up a few pieces of 1″ boards where the hood narrowed. Here you can see that the sconces are a bit too close—those were added before the drywall and cabinets were installed so the measurements changed a bit. It is a tight fit between the ceiling beam but my electrician will go back in and adjust them a couple inches.

Next, the angled pieces were added along with the vent frame, and we cut a hole for the duct.

Once the hole was cut on both the interior and exterior siding, the outside wall cap was installed and the vent wired up, set into place and screwed into the wood frame.

Then we called it quits for the night and went home.

The next day was Christmas Eve, and I was not confident that we'd be able to complete this hood that day (there was a winter storm and we had to return before dark for our holiday dinner).

We assumed the trickiest parts were behind us, but that was not the case. I have to give so much credit to Lucas for stepping in and taking charge of figuring out each step. It was a collaborative effort between him and my dad (I helped wherever I could but it was mostly them) and I am so impressed with how quickly he's learning the ropes of DIYing, and even more thrilled that he's genuinely enjoying it. #proudgirlfriend

Anyway, the building of the frame continued…

One step at a time. Some parts were easier than others.

Like anything with 90 degree angles.

These pieces? Not as much…

It took a few several tries to get it just right. And by “just right” I mean “close enough.”

Eventually, our frame was finished and ready for the reclaimed wood! The choice was to make our lives difficult and miter the edges. The first row of boards were straight, so that was easy enough:

Except that reclaimed = bowed and imperfect, so the joints did not exactly match up perfectly. Good thing it is supposed to be rustic…

The boards were attached using finish nails, so they can be individually removed without any issue if the vent hood/duct/wiring should ever need to be repaired or replaced.

Then came the tricky compound angles. Not only did the side cuts have to be angled, but they had to be mitered at the right angle, matching both the frame and each other… using boards that were both bowed and tapered. It was literally mission impossible.

We had to make some adjustments and compromises along the way, but we did the best we could.

And it did not look half bad.

Each board probably took 20 minutes of measuring, remeasuring, cutting & recutting since every board and angle was different.

By the time we reached the top, I realized The aim was to add some extra trim to finish it off. We ran out of wood, it was dark and dumping snow, so that is where this project ends.

On the bottom, I'll attach another board which will end up looking like this:

And to finish off the top where it meets the ceiling, I'll run another board along the outside to give it a nice finished edge:

I am bummed we could not even completely finish one of the projects on my list, but still pleased with how it looks…

I was on the fence about painting it white or gray, but I think I like the natural wood—at least for now. We will see once the tile is in place and counters are stained.

What do you think?

While I was at the lumber yard, I picked up a couple 2×10's to use as floating shelves:

They'll be installed along this wall…

Using these shelf brackets from my favorite shelf hardware shop (remember those fun master bath shelf brackets?)

That will happen in the near future (hopefully) and in the meantime I am crossing my fingers for dry, non-freezing weather so we can finally get the exterior of this house painted. These next five weeks are going to be challenging. But they will also fly by, and I am looking forward to everything the new year has in store…

On a more reflective note—2016 was such a monumental year of change and growth for me, both personally and professionally. Between falling in love, finishing and selling my home, moving to the city, traveling and buying my first flip, it is going to be hard to top. But I have a feeling 2017 will be the best one yet… 😉

I am so thankful for this past year of your encouragement and support, and hope you will continue with me on this journey through 2017. There is going to be some changes, but I have never been so sure of what I want and where I am going, and cannot wait to experience another year of this big, memorable adventure called life.

Wishing you all the happiest ending to your 2016, and I'll see you in 2017!

Disclosure: Some of the products listed were provided via sponsorship—all of which I selected and fully approve of.