Refurbishing a dresser with a natural wood finish

Today's post is all about refurbishing a dresser to achieve a natural, aged wood look:

I would been stalking every local thrift/antique/furniture store and local online sale sites looking for the well suited antique dresser to refinish. And then, last week, it came out of nowhere:

It was just what I had envisioned. And it was only $90! I hit the jackpot. An hour after I spotted it online it was in my garage and disassembly had begun.

While the style/shape/size were well suited, I was not a fan of the finish. I do not mind warm wood tones, but this thing was a very outdated shiny reddish-yellow hue that would never work for our style.

Warning: this project was very time consuming + labor intensive, and was completed over the course of a week as I could not handle more than a few hours at a time.

The dresser was in pretty decent shape, but there were lots of very obvious scratches:

I had planned on sanding it down to the bare wood so this did not matter at all.

Step 1: Strip the paint or vanish

The dresser had thick layer of varnish so that had to go first. Instead of sanding it away (which would quickly clog up the sandpaper), I grabbed a hand scraper and got to work.

So very tedious.

I finally decided I had enough and busted out the paint stripper. I picked up a new can of liquid stripper (on the right) to try out, and it was worthless. Stick to the paste/gel!

Here is the gel, doin' it is thing…

It makes scraping much easier, but it also does not take up as much so I was still left with the reddish stain (whereas the scraper alone could get down to the bare wood).

And the drawers…

Oh yeah, stripper is probably the messiest stuff you will ever work with.

Here is all of the drawers, de-lacquered:

The sides of the dresser were a huge pain. The wood was different than everywhere else and it did not want to let go of the varnish, even after two coats of stripper.

Mid-progress… bear in mind it was also 100° in this garage every afternoon. I had old sticky paint stripper and sawdust stuck all over me the whole time (so glad this project is over).

Step 2: Sand

After several days, I had finally all of the varnish removed and it was time to start sanding.

But first I used my scraper to roughen things up a bit and give it that weathered look.

As soon as the sandpaper hit the wood, I started to see the light at the end of the tunnel. It genuinely diminished the old red stain.

Ahh, fresh bare wood!

Looking much better. The legs and trim pieces were different types of wood than the sides, top and drawer fronts so they sanded down to a nice colorless wood, while the rest retained most of its natural red tone, which was a little frustrating.

Step 3: Stain to desired color (optional)

After I deemed it sufficiently sanded, it was time to stain. I used a concoction of dark walnut, driftwood, and weathered gray and began to apply….

And I was not a fan.

I thought the gray would combat the red tones, but instead it intensified them and made everything pinkish looking. Huge fail.

All I could do was sand all the stain off and try again. I was a few hours into it, and then tragedy struck…

It was working overtime for this project and just could not handle the pressure any longer.

So I upgraded to a Mouse sander:

Seriously, I am kicking myself for not getting one of these earlier. It is night and day from the old hand sander—I was blown away at how well it worked, especially for this project where there are so many small crevices and detailed areas where the other sander just could not cut it.

Tip: an orbital sander is even better to cover large areas quickly.

Finally things were starting to look up, and I was able to finish sanding all that stain off in no time.

Knowing that any stain I add would bring out the red again, The choice was to go au natural and embrace the mostly-bare wood tones.

Step 4: Seal the wood (optional)

But I still wanted to seal it somehow… so I picked up this wax, hoping for a coating that would not be visible so I could retain the old weathered look.

Sadly, that was not the case.

You see the little orange spot on the corner? That is after buffing out a bit of wax, and it turned it red again. It does not look so bad in this photo, but trust me, it was right back to where I started and I did not want to go down that road again.

So I am leaving it natural. Any dings and scratches will just add to the character. Amen to farmhouse style.

Tip: If you choose not to seal the bare wood, be careful not to spill any oils/liquid on it, as it will stain the surface.

I reused the original handles as I do not mind them, but I am open to swapping them out. It might be a little tricky since the drawers are curved though.

Dresser reveal

Update: You can see how the dresser looks in our completed master bedroom makeover!